System and Compressed Memory is a Windows process that compresses inactive memory pages and pools kernel tasks, so high CPU usually means the system is under memory pressure or an app is leaking RAM. The fix is to find the app consuming memory, reduce the load with more RAM or a larger paging file, and only disable memory compression as a last resort. Rebooting clears a temporary leak while you identify the cause.
This guide walks through the process in clear illustrated steps, from the first preparation to a finished result. Each step has its own picture, so you can compare your progress as you go.
How to use this guide
Work through the steps in order. Method 1 of 3 covers the basics, and the later methods offer alternatives and finishing touches. If you only have a minute, skim the Quick steps box above and come back for the details.
Related guides
- How to Fix 100 disk usage when task manager shows system as the cause
- How to Bake an apple pie from scratch
- How to Remove hard water stains
- How to Do a manicure at home
- Browse all Fix Slow Device guides
- All 52runoob guides
Trusted external resources
- Microsoft Learn — Memory allocation errors and slow page file growth
- Microsoft Learn — Low system memory and paging file settings
- Microsoft Support — Windows Memory Diagnostic tool
A note on sources
We check each guide against the official resources listed in References at the end of this article. External links open in a new tab; the related guides above stay on this site.
Quick steps
- Open Task Manager and compare memory use with System and Compressed Memory CPU.
- Sort by memory to find the application leaking RAM.
- Close or restart the offending application.
- Add physical RAM if the PC has too little memory.
- Increase the paging file size in advanced system settings.
- Disable memory compression via PowerShell only as a last resort.
Things you'll need
- A Windows 11 PC with administrator access
- Task Manager and Resource Monitor
- A compatible RAM upgrade if needed
- About 20 minutes plus a reboot
Step-by-step
Method 1 of 3: Find the App Causing Memory Pressure
Step 1: Open Task Manager
Press Ctrl+Shift+Esc and open the Processes tab to see current CPU and memory use.
Step 2: Check overall memory pressure
Look at the Memory figure to see how much of your RAM is currently in use.
Step 3: Sort by memory
Click the Memory column header so the biggest consumers rise to the top of the list.
Step 4: Spot a leaking app
Find any application whose memory keeps climbing over time instead of staying steady.
Step 5: Restart the offending app
Close and reopen the app that is leaking memory to release the accumulated RAM.
Step 6: Check Resource Monitor
Open Resource Monitor from Task Manager for a more detailed view of memory and CPU.
Step 7: Reduce open tabs and files
Close documents and browser tabs you are not using to lower memory demand quickly.
Step 8: Reboot if needed
Restart the PC to clear a stubborn leak and recheck whether the CPU settles.
Method 2 of 3: Add Memory and Tune the Paging File
Step 9: Check installed RAM
Open Settings, then System, then About to see how much memory the PC has installed.
Step 10: Compare with your workload
Decide whether your typical apps justify more RAM based on how often memory is full.
Step 11: Check upgrade options
Confirm with the PC maker what RAM capacity and type the motherboard supports.
Step 12: Install more RAM
Power off the PC and add compatible memory modules if the machine allows an upgrade.
Step 13: Open advanced system settings
Search for advanced system settings and open the Performance options dialog.
Step 14: Open virtual memory settings
Under Performance Options and Advanced, click Change to edit the paging file.
Step 15: Increase paging file size
Raise the maximum paging file size so Windows has more room under memory pressure.
Step 16: Apply the change
Confirm the dialog to save and note that a restart is required for the new size to take effect.
Step 17: Reboot and recheck
Restart the PC and confirm System and Compressed Memory CPU has dropped.
Method 3 of 3: Disable Memory Compression as a Last Resort
Step 18: Open an elevated PowerShell
Search for PowerShell, right-click it, and choose to run it as administrator.
Step 19: Check compression state
Run the command that reports whether memory compression is currently enabled.
Step 20: Understand the tradeoff
Know that turning compression off frees CPU but may use more disk paging on low-RAM systems.
Step 21: Disable memory compression
Enter the disable-memory-compression command and confirm it completes without error.
Step 22: Restart the computer
Reboot so the change takes effect across the whole system.
Step 23: Measure the result
Open Task Manager and compare CPU usage with the earlier baseline.
Step 24: Re-enable if it hurts
If the PC becomes sluggish, run the enable command to restore memory compression.
Tips
- High CPU here usually reflects memory pressure, not a damaged Windows file.
- Adding RAM is the most reliable long-term fix if you regularly run out of memory.
- Rebooting clears a temporary leak so you can test from a clean state.
Warnings
- Disabling memory compression can hurt performance on low-RAM machines.
- Changing the paging file requires a reboot before it takes effect.
- Do not buy RAM without checking what your motherboard supports.
Frequently asked questions
What is System and Compressed Memory?
It is a Windows process that compresses inactive memory pages so more data fits in RAM, and it also hosts several kernel background tasks. It is a normal part of Windows and should not be removed. High CPU from it usually means the system is working hard to manage scarce memory.
Why does System and Compressed Memory use high CPU?
When RAM fills up, Windows spends more time compressing and decompressing pages and managing the paging file, which shows up as CPU load. A memory leak in another app makes this worse because available memory keeps shrinking. Find the app whose memory grows steadily and restart it.
Is it safe to disable memory compression?
It is safe in that Windows still works, but it can trade lower CPU for higher disk paging and slower response on a low-RAM PC. It should be a last resort after you have addressed leaks and added memory. You can re-enable it with the matching command if performance gets worse.
Will adding RAM fix high CPU from this process?
Often yes, if the root cause is simply not having enough memory for your workload. More RAM reduces compression and paging activity, so the process has less work to do. If a specific app leaks memory, adding RAM only delays the problem and the app still needs to be restarted.
References
- Microsoft Learn — Memory allocation errors and slow page file growth. https://learn.microsoft.com/en-us/troubleshoot/windows-client/performance/slow-page-file-growth-memory-allocation-errors
- Microsoft Learn — Low system memory and paging file settings. https://learn.microsoft.com/en-us/troubleshoot/developer/visualstudio/ide/visual-studio-unresponsive-resources-consuming-memory
- Microsoft Support — Windows Memory Diagnostic tool. https://support.microsoft.com/en-us/help/4028391
- wikiHow — How to Fix System and Compressed Memory High CPU on Windows 11. https://www.wikihow.com/Reduce-CPU-Usage
Every guide is reviewed against its sources. See our editorial policy.
Reader comments
0 so farFinished this guide? Tell other readers what worked, what didn't, and what you would change.