Printable checklist

How to Fix System and Compressed Memory High CPU on Windows 11

System and Compressed Memory is a Windows process that compresses inactive memory pages and pools kernel tasks, so high CPU usually means the system is under memory pressure or an app is leaking RAM. The fix is to find the app consuming memory, reduce the load with more RAM or a larger paging file, and only disable memory compression as a last resort. Rebooting clears a temporary leak while you identify the cause. This illustrated guide covers 3 methods and 24 steps, with a separate picture for every step.

By Co-authored by 52runoob Editorial Team · 24 steps · Performance & Speed · Updated November 21, 2026

Back to the guide
  1. 1. Open Task Manager

    Press Ctrl+Shift+Esc and open the Processes tab to see current CPU and memory use.

  2. 2. Check overall memory pressure

    Look at the Memory figure to see how much of your RAM is currently in use.

  3. 3. Sort by memory

    Click the Memory column header so the biggest consumers rise to the top of the list.

  4. 4. Spot a leaking app

    Find any application whose memory keeps climbing over time instead of staying steady.

  5. 5. Restart the offending app

    Close and reopen the app that is leaking memory to release the accumulated RAM.

  6. 6. Check Resource Monitor

    Open Resource Monitor from Task Manager for a more detailed view of memory and CPU.

  7. 7. Reduce open tabs and files

    Close documents and browser tabs you are not using to lower memory demand quickly.

  8. 8. Reboot if needed

    Restart the PC to clear a stubborn leak and recheck whether the CPU settles.

  9. 9. Check installed RAM

    Open Settings, then System, then About to see how much memory the PC has installed.

  10. 10. Compare with your workload

    Decide whether your typical apps justify more RAM based on how often memory is full.

  11. 11. Check upgrade options

    Confirm with the PC maker what RAM capacity and type the motherboard supports.

  12. 12. Install more RAM

    Power off the PC and add compatible memory modules if the machine allows an upgrade.

  13. 13. Open advanced system settings

    Search for advanced system settings and open the Performance options dialog.

  14. 14. Open virtual memory settings

    Under Performance Options and Advanced, click Change to edit the paging file.

  15. 15. Increase paging file size

    Raise the maximum paging file size so Windows has more room under memory pressure.

  16. 16. Apply the change

    Confirm the dialog to save and note that a restart is required for the new size to take effect.

  17. 17. Reboot and recheck

    Restart the PC and confirm System and Compressed Memory CPU has dropped.

  18. 18. Open an elevated PowerShell

    Search for PowerShell, right-click it, and choose to run it as administrator.

  19. 19. Check compression state

    Run the command that reports whether memory compression is currently enabled.

  20. 20. Understand the tradeoff

    Know that turning compression off frees CPU but may use more disk paging on low-RAM systems.

  21. 21. Disable memory compression

    Enter the disable-memory-compression command and confirm it completes without error.

  22. 22. Restart the computer

    Reboot so the change takes effect across the whole system.

  23. 23. Measure the result

    Open Task Manager and compare CPU usage with the earlier baseline.

  24. 24. Re-enable if it hurts

    If the PC becomes sluggish, run the enable command to restore memory compression.