Every guide lists its sources, tips, and warnings. Read our editorial policy.

How to Fix Windows 11 Slow After Waking From Sleep With 100% Disk

After waking from sleep, Windows 11 reinitializes drivers and resumes background work such as antivirus scans and SysMain, which can drive disk usage to 100% and make the PC feel frozen for a while. Updating chipset and storage drivers and tuning power settings reduces the wake-time stall. If the pause is disruptive, disabling fast startup or switching from sleep to hibernate can help. This illustrated guide covers 2 methods and 15 steps, with a separate picture for every step.

Download checklist (PDF)

After waking from sleep, Windows 11 reinitializes drivers and resumes background work such as antivirus scans and SysMain, which can drive disk usage to 100% and make the PC feel frozen for a while. Updating chipset and storage drivers and tuning power settings reduces the wake-time stall. If the pause is disruptive, disabling fast startup or switching from sleep to hibernate can help.

This guide walks through the process in clear illustrated steps, from the first preparation to a finished result. Each step has its own picture, so you can compare your progress as you go.

How to use this guide

Work through the steps in order. Method 1 of 2 covers the basics, and the later methods offer alternatives and finishing touches. If you only have a minute, skim the Quick steps box above and come back for the details.

Trusted external resources

A note on sources

We check each guide against the official resources listed in References at the end of this article. External links open in a new tab; the related guides above stay on this site.

Quick steps

  1. Wait a minute or two to see if the post-wake disk burst settles on its own.
  2. Update chipset, storage, and graphics drivers.
  3. Adjust power settings so the disk does not spin down aggressively.
  4. Disable fast startup if waking is slow.
  5. Let antivirus and SysMain finish their post-resume work.
  6. Consider using hibernate or shutdown instead of sleep.

Things you'll need

  • A Windows 11 laptop or desktop with administrator access
  • Device Manager and Power Options in Windows
  • Current chipset and storage drivers from the manufacturer
  • About 15 minutes to change settings and test a wake cycle

Step-by-step

Section 1

Method 1 of 2: Update Drivers and Tune Power Settings

Step 1: Give the PC a moment to settle

After waking, wait a minute or two before acting because the disk burst often clears on its own.

Step 1: Give the PC a moment to settle

Step 2: Open Device Manager

Right-click the Start button and choose Device Manager to review installed hardware.

Step 2: Open Device Manager

Step 3: Update chipset and storage drivers

Expand System devices and Disk drives, then update drivers for the chipset and storage controller.

Step 3: Update chipset and storage drivers

Step 4: Update the graphics driver

Update the display adapter driver as well, since graphics initialization can stall resume.

Step 4: Update the graphics driver

Step 5: Open Power Options

Search for editing the power plan and open the advanced power settings dialog.

Step 5: Open Power Options

Step 6: Adjust hard disk timeout

Increase the time before the hard disk turns off so it is not spinning up right at wake.

Step 6: Adjust hard disk timeout

Step 7: Test a wake cycle

Put the PC to sleep and wake it again to see whether the disk stall is reduced.

Step 7: Test a wake cycle
Section 2

Method 2 of 2: Disable Fast Startup and Change Sleep Behavior

Step 8: Open Control Panel power options

Search for choosing the power button function and open the power options control panel.

Step 8: Open Control Panel power options

Step 9: Open advanced power settings

Click to choose what the power buttons do, then change settings that are currently unavailable.

Step 9: Open advanced power settings

Step 10: Turn off fast startup

Under Shutdown settings, uncheck the fast startup option and save the changes.

Step 10: Turn off fast startup

Step 11: Review sleep settings

Return to Power Options and set how long the PC waits before sleeping on battery and plugged in.

Step 11: Review sleep settings

Step 12: Reduce background work on wake

In Task Manager Startup apps, disable unnecessary programs that resume and hit the disk.

Step 12: Reduce background work on wake

Step 13: Allow the antivirus scan to finish

Let a scheduled post-wake scan complete rather than interrupting it each time.

Step 13: Allow the antivirus scan to finish

Step 14: Switch to hibernate if needed

In power options, enable hibernate and choose it instead of sleep if wake stalls persist.

Step 14: Switch to hibernate if needed

Step 15: Verify the new behavior

Sleep and wake again, then check Task Manager to confirm the disk usage spike is shorter.

Step 15: Verify the new behavior

Tips

  • A short disk burst right after waking is usually background tasks catching up, not a fault.
  • Modern standby devices resume network and scans immediately on wake, increasing disk I/O.
  • Updating chipset drivers often removes the long pause after resume.

Warnings

  • Do not force shutdown every time; it can leave updates or files inconsistent.
  • Changing power plans may affect battery life, so note your original settings.
  • Back up data before troubleshooting a drive that makes odd noises on wake.

Frequently asked questions

Why is my disk at 100% right after waking from sleep?

On resume, Windows restarts drivers and background services such as antivirus and SysMain, all of which may read the disk at once. Modern standby systems also reconnect devices and refresh content immediately. The burst usually settles within a minute or two.

Does fast startup cause the slowdown after wake?

Fast startup mainly affects boot rather than sleep resume, but related power-state bugs can make both transitions slow. Disabling it is safe and can improve wake behavior on some systems. Test after disabling to see if it helps your PC.

Should I use hibernate instead of sleep?

Hibernate writes system state to disk and powers off fully, avoiding some modern standby wake issues. It uses no battery but resumes a bit slower than sleep. If post-wake disk stalls persist, hibernate is a reasonable alternative.

Which drivers matter most for slow wake?

Chipset, storage controller, and graphics drivers have the biggest effect on resume behavior. Install them from your PC or motherboard manufacturer rather than a generic source. Keeping them current often removes the long stall.

References

  1. Microsoft Support — Shut down, sleep, or hibernate your PC. https://support.microsoft.com/en-us/windows/shut-down-sleep-or-hibernate-your-pc-2941d165-7d0a-a5e8-c5ad-8c972e8e6eff
  2. Microsoft Learn — System power states and fast startup. https://learn.microsoft.com/en-us/windows/win32/power/system-power-states
  3. Microsoft Support — Configure startup applications in Windows. https://support.microsoft.com/en-us/help/4558286
  4. wikiHow — How to Fix Windows 11 Slow After Waking From Sleep With 100% Disk. https://www.wikihow.com/Speed-Up-Your-Computer

Every guide is reviewed against its sources. See our editorial policy.

Reader comments

0 so far

Finished this guide? Tell other readers what worked, what didn't, and what you would change.

Be kind and constructive. Comments are published instantly.