Crooked glasses are usually an easy fix with a few careful adjustments at home. This illustrated guide covers 3 methods and 17 steps, with a separate picture for every step.
This guide walks through the process in clear illustrated steps, from the first preparation to a finished result. Each step has its own picture, so you can compare your progress as you go.
How to use this guide
Work through the steps in order. Method 1 of 3: Diagnose the Problem covers the basics, and the later methods offer alternatives and finishing touches. If you only have a minute, skim the Quick steps box above and come back for the details.
Related guides
- How to Clean Your Glasses
- How to Choose Glasses for Your Face
- How to Prevent Foggy Glasses
- How to Take Care of Your Belongings
- Browse all Beauty & Style guides
- All 52runoob guides
Trusted external resources
A note on sources
We check each guide against the official resources listed in References at the end of this article. External links open in a new tab; the related guides above stay on this site.
Quick steps
- Find which part is bent before you adjust anything
- Heat plastic frames with warm water to make them flexible
- Make tiny changes and check the fit often
Things you'll need
- A small screwdriver for eyeglasses
- A soft cloth
- A bowl of warm water (for plastic frames)
- A toothpick for tiny screws
- A flat surface for checking alignment
Step-by-step
Method 1 of 3: Diagnose the Problem :: Find what is actually crooked.
Step 1: Clean the lenses first
A clear view helps you see the frame alignment properly.
Step 2: Place the glasses on a flat surface
Look from above to spot uneven arms or lenses.
Step 3: Check the lens line
See whether both lenses sit level with each other.
Step 4: Inspect the hinges
Look for loose screws where the arms meet the frame.
Step 5: Check the nose pads
Make sure the pads sit evenly and are not loose.
Method 2 of 3: Straighten and Tighten :: Make careful, small adjustments.
Step 6: Warm plastic frames
Soak them in warm water briefly so they become flexible.
Step 7: Gently bend a metal arm
Use light pressure to straighten a bent temple arm.
Step 8: Level the lenses
Adjust one side at a time until both lenses sit even.
Step 9: Tighten the screws
Use a tiny screwdriver to snug the hinge screws.
Step 10: Reseat the nose pads
Press loose pads back into place evenly.
Method 3 of 3: Check the Fit :: Confirm comfort and alignment.
Step 11: Put the glasses on
Wear them to feel how the adjustment changed the fit.
Step 12: Check for even pressure
The pads should rest evenly without pinching.
Step 13: Look in a mirror
Confirm the lenses and arms look straight from the front.
Step 14: Make a final tiny tweak
Correct any remaining tilt with a very small adjustment.
Step 15: Store them safely
Keep the glasses in a case when not in use to protect the fit.
Tips
- Metal frames can be bent gently by hand; plastic frames need warmth first.
- Tighten the tiny hinge screws carefully, since they are easy to strip.
- See How to Clean Your Glasses for routine care.
Warnings
- Do not overheat plastic frames, as they can warp or crack.
- If a frame is badly damaged or painful to wear, visit an optician instead.
Frequently asked questions
Can I fix glasses at home? Minor bends and loose screws are usually fixable with care.
How do I straighten plastic frames? Soften them in warm water first, then adjust gently.
When should I see a professional? If the frame is cracked or the fit still hurts after adjusting.
References
- American Optometric Association. https://www.aoa.org/
- Vision Council — eyewear guidance. https://www.thevisioncouncil.org/
- Wikipedia — eyeglasses. https://en.wikipedia.org/wiki/Eyeglasses
- wikiHow — How to Fix Crooked Glasses and Tighten Your Spectacles. https://www.wikihow.com/adjust-eyeglasses
Every guide is reviewed against its sources. See our editorial policy.
Reader comments
0 so farFinished this guide? Tell other readers what worked, what didn't, and what you would change.