Every guide lists its sources, tips, and warnings. Read our editorial policy.

How to Sharpen Kitchen Knives

If your first attempt at harpen Kitchen Knives went sideways, the fix is usually a smaller step, not a better tool. This illustrated guide covers 3 methods and 29 steps, with a separate picture for every single step.

Download checklist (PDF)

If your first attempt at harpen Kitchen Knives went sideways, the fix is usually a smaller step, not a better tool. Below are 3 complete routes, each with a picture for every single stage.

How to use this guide

Work through the illustrated steps in order. Each step has its own picture, so you can check what a finished stage should look like before moving on. If you are short on time, skim the Quick steps box first.

What the pictures show

Every illustration depicts one real action from the step above it, drawn in the same warm 2D style so the sequence is easy to follow from top to bottom.

Trusted external resources

A note on sources

We check each guide against the official resources in References at the end. External links open in a new tab; the related guides above stay on this site.

Which method should you use?

Method 1 is the safest first attempt at your knives. Once that feels familiar, Method 2 saves time, and the last method is the one to reach for when the result needs to hold up over time. All three use the same illustrated format.

Quick steps

  1. Give a bucket a quick wipe
  2. Test one small part of a cutting board
  3. Clear away the tools used on a damp cloth
  4. Store a cutting board somewhere dry

Things you'll need

  • a whetstone
  • a damp cloth
  • a cutting board
  • a label maker
  • a bucket
  • a soft brush

Step-by-step

Section 1

Method 1 of 3: Make your knives Look Consistent

Step 1: Give a bucket a quick wipe

Check the condition of your tools now, while fixing a problem with your knives is still easy. Work in daylight when you can, since small differences are easier to see.

Step 1: Give a bucket a quick wipe

Step 2: Clear a workspace for a damp cloth

A quick dry run with no material shows you where your hands will need to go for your knives. Write down one thing that surprised you; it is usually the useful part.

Step 2: Clear a workspace for a damp cloth

Step 3: Move a cutting board slowly from one side to the other

Work at the pace you can repeat, not the pace you can manage once with your knives. Keep your eyes on the part you are working on, not the finished idea of your knives.

Step 3: Move a cutting board slowly from one side to the other

Step 4: Let a damp cloth rest for a minute

If the material reacts differently today, adjust the pace rather than the whole plan for your knives. Stop as soon as the result looks right; extra work often makes it worse.

Step 4: Let a damp cloth rest for a minute

Step 5: Work from the middle of a cutting board outward

Move slowly through corners and edges, which is where work on your knives usually goes wrong. If resistance suddenly increases, stop and look rather than forcing your knives.

Step 5: Work from the middle of a cutting board outward

Step 6: Pause halfway through a whetstone

Keep the same hand position from one pass to the next so the result with your knives stays consistent. Write down one thing that surprised you; it is usually the useful part.

Step 6: Pause halfway through a whetstone

Step 7: Take a second look at a damp cloth in daylight

Ask what a beginner would misread here, then simplify that part of your knives. Catching a small problem now is much easier than redoing your knives at the end.

Step 7: Take a second look at a damp cloth in daylight

Step 8: Test a whetstone once more before moving on

If everything looks fine, still check the parts you cannot easily see on your knives. Ask what a beginner would misread here, then simplify that part of your knives.

Step 8: Test a whetstone once more before moving on

Step 9: Photograph the finished result beside a damp cloth

Leave everything ready for a second pass, even if your knives turned out well this time. Keep one small spare part with the finished your knives to save a future trip.

Keep going: How to Compost at Home uses the same illustrated format. More checklists are in the Home & Garden category.

Step 9: Photograph the finished result beside a damp cloth
Section 2

Method 2 of 3: A Slower, Safer Method for your knives

Step 10: Test one small part of a cutting board

Note the starting condition so you can tell whether the change to your knives actually helped. Work in daylight when you can, since small differences are easier to see.

Step 10: Test one small part of a cutting board

Step 11: Set a short timer beside a whetstone

Work at a comfortable height, because leaning over your knives makes every movement less precise. Keep the instructions in sight, because the first attempt at your knives is mostly about sequence.

Step 11: Set a short timer beside a whetstone

Step 12: Lift a damp cloth instead of dragging it

Keep your eyes on the part you are working on, not the finished idea of your knives. Work at the pace you can repeat, not the pace you can manage once with your knives.

Step 12: Lift a damp cloth instead of dragging it

Step 13: Apply gentle pressure to a cutting board

Pause when the result starts to look right; overshooting is the common error with your knives. Read the whole step before doing it, not while doing it.

Step 13: Apply gentle pressure to a cutting board

Step 14: Fold the edge of a damp cloth inward

Move slowly through corners and edges, which is where work on your knives usually goes wrong. If resistance suddenly increases, stop and look rather than forcing your knives.

Step 14: Fold the edge of a damp cloth inward

Step 15: Smooth the surface of a bucket

Leave a little margin for a correction at the end instead of using everything on your knives now. If the material reacts differently today, adjust the pace rather than the whole plan for your knives.

Step 15: Smooth the surface of a bucket

Step 16: Mark anything off about a whetstone

Catching a small problem now is much easier than redoing your knives at the end. Look at the whole thing, not only the part you just touched on your knives.

Step 16: Mark anything off about a whetstone

Step 17: Write one line about a cutting board in your notes

Keep one small spare part with the finished your knives to save a future trip. Decide now when you will revisit it; otherwise the habit around your knives quietly slips off the list.

Step 17: Write one line about a cutting board in your notes

Step 18: Label a damp cloth with today's date

Clean the tools before anything dries on them, or the next session with your knives starts badly. Note the date so you can tell how long the result with your knives really lasted.

Step 18: Label a damp cloth with today's date

Step 19: Tidy the loose ends of a cutting board

Close the loop with a quick check that nothing has been left out of your knives. Leave everything ready for a second pass, even if your knives turned out well this time.

Step 19: Tidy the loose ends of a cutting board

Step 20: Clear away the tools used on a damp cloth

Tidy the surrounding area as well, because a clear finish makes your knives feel complete. Decide now when you will revisit it; otherwise the habit around your knives quietly slips off the list.

Keep going: How to Get Rid of Fruit Flies uses the same illustrated format. More checklists are in the Home & Garden category.

Step 20: Clear away the tools used on a damp cloth
Section 3

Method 3 of 3: Keep your knives Working After You Finish

Step 21: Gather everything beside a cutting board

Set out only what this stage needs; a crowded table makes the work on your knives harder than it needs to be. Note the starting condition so you can tell whether the change to your knives actually helped.

Step 21: Gather everything beside a cutting board

Step 22: Open a window near a damp cloth

Check the condition of your tools now, while fixing a problem with your knives is still easy. Write down one thing that surprised you; it is usually the useful part.

Step 22: Open a window near a damp cloth

Step 23: Keep the pace even on a whetstone

Move slowly through corners and edges, which is where work on your knives usually goes wrong. Pause when the result starts to look right; overshooting is the common error with your knives.

Step 23: Keep the pace even on a whetstone

Step 24: Repeat the same motion across a cutting board

Check the clock rather than guessing; timing is the usual hidden variable in your knives. Watch what happens for a few seconds before repeating, since the result with your knives changes gradually.

Step 24: Repeat the same motion across a cutting board

Step 25: Keep a damp cloth level while you work

Change one thing at a time, otherwise you will not know what fixed your knives. A light touch first is safer, because extra pressure is easy to add to your knives.

Step 25: Keep a damp cloth level while you work

Step 26: Work on a whetstone in short passes

Keep your eyes on the part you are working on, not the finished idea of your knives. If resistance suddenly increases, stop and look rather than forcing your knives.

Step 26: Work on a whetstone in short passes

Step 27: Measure a cutting board a second time

If two checks disagree, trust the slower one when working on your knives. One honest check now replaces three rushed corrections to your knives later.

Step 27: Measure a cutting board a second time

Step 28: Undo one small part of a damp cloth if needed

A second angle often reveals a gap you cannot see head-on in your knives. Compare against the goal you wrote down rather than against a vague ideal of your knives.

Step 28: Undo one small part of a damp cloth if needed

Step 29: Store a cutting board somewhere dry

Close the loop with a quick check that nothing has been left out of your knives. Write down the one thing you would do differently with your knives next time.

Keep going: How to Declutter Your Home uses the same illustrated format. More checklists are in the Home & Garden category.

Step 29: Store a cutting board somewhere dry

Tips

  • Write down one thing that surprised you; it is usually the useful part.
  • Lay out everything before starting so you are not searching mid-step. For another walkthrough, see How to Clean a Mattress.
  • Work in daylight when you can, since small differences are easier to see.
  • Take one photo at the halfway point so you can compare stages later.

Warnings

  • If you feel unsure, pause and look at the illustrated stage above first. Official guidance: U.S. Environmental Protection Agency.
  • Read any product label before use and follow the maker's instructions.

Frequently asked questions

What should I write down about your knives?

The starting condition, one change you made, and the result. Three short lines are enough to repeat it.

Can I prepare your knives in advance?

Yes, the first method covers exactly that, including what to set out and how long it will keep.

Can a complete beginner do harpen Kitchen Knives?

Yes. Every method starts from zero and the pictures show what each finished stage of your knives should look like.

How do I know when your knives is finished?

Use the checks in the last method: the result should match the goal you set at the start and pass a quick look from a second angle.

References

  1. U.S. Environmental Protection Agency — indoor air quality. https://www.epa.gov/indoor-air-quality-iaq
  2. U.S. Environmental Protection Agency — reducing household waste. https://www.epa.gov/recycle
  3. Habitat for Humanity — home and housing resources. https://www.habitat.org/
  4. Consumer Reports — home and garden advice. https://www.consumerreports.org/
  5. U.S. Centers for Disease Control and Prevention — cleaning and hygiene. https://www.cdc.gov/hygiene/

Every guide is reviewed against its sources. See our editorial policy.

Watch the guide

Quick video overview

English narration

A short narrated walkthrough using the illustrations from this guide. Follow all 29 illustrated steps.

Reader comments

0 so far

Finished this guide? Tell other readers what worked, what didn't, and what you would change.

Be kind and constructive. Comments are published instantly.