Printable checklist

How to Sharpen Kitchen Knives

If your first attempt at harpen Kitchen Knives went sideways, the fix is usually a smaller step, not a better tool. This illustrated guide covers 3 methods and 29 steps, with a separate picture for every single step.

By Co-authored by HowCompass Editorial Team · 29 steps · Home & Garden · Updated November 16, 2026

Back to the guide
  1. 1. Give a bucket a quick wipe

    Check the condition of your tools now, while fixing a problem with your knives is still easy. Work in daylight when you can, since small differences are easier to see.

  2. 2. Clear a workspace for a damp cloth

    A quick dry run with no material shows you where your hands will need to go for your knives. Write down one thing that surprised you; it is usually the useful part.

  3. 3. Move a cutting board slowly from one side to the other

    Work at the pace you can repeat, not the pace you can manage once with your knives. Keep your eyes on the part you are working on, not the finished idea of your knives.

  4. 4. Let a damp cloth rest for a minute

    If the material reacts differently today, adjust the pace rather than the whole plan for your knives. Stop as soon as the result looks right; extra work often makes it worse.

  5. 5. Work from the middle of a cutting board outward

    Move slowly through corners and edges, which is where work on your knives usually goes wrong. If resistance suddenly increases, stop and look rather than forcing your knives.

  6. 6. Pause halfway through a whetstone

    Keep the same hand position from one pass to the next so the result with your knives stays consistent. Write down one thing that surprised you; it is usually the useful part.

  7. 7. Take a second look at a damp cloth in daylight

    Ask what a beginner would misread here, then simplify that part of your knives. Catching a small problem now is much easier than redoing your knives at the end.

  8. 8. Test a whetstone once more before moving on

    If everything looks fine, still check the parts you cannot easily see on your knives. Ask what a beginner would misread here, then simplify that part of your knives.

  9. 9. Photograph the finished result beside a damp cloth

    Leave everything ready for a second pass, even if your knives turned out well this time. Keep one small spare part with the finished your knives to save a future trip. Keep going: [How to Compost at Home](/how-to-compost-at-home) uses the…

  10. 10. Test one small part of a cutting board

    Note the starting condition so you can tell whether the change to your knives actually helped. Work in daylight when you can, since small differences are easier to see.

  11. 11. Set a short timer beside a whetstone

    Work at a comfortable height, because leaning over your knives makes every movement less precise. Keep the instructions in sight, because the first attempt at your knives is mostly about sequence.

  12. 12. Lift a damp cloth instead of dragging it

    Keep your eyes on the part you are working on, not the finished idea of your knives. Work at the pace you can repeat, not the pace you can manage once with your knives.

  13. 13. Apply gentle pressure to a cutting board

    Pause when the result starts to look right; overshooting is the common error with your knives. Read the whole step before doing it, not while doing it.

  14. 14. Fold the edge of a damp cloth inward

    Move slowly through corners and edges, which is where work on your knives usually goes wrong. If resistance suddenly increases, stop and look rather than forcing your knives.

  15. 15. Smooth the surface of a bucket

    Leave a little margin for a correction at the end instead of using everything on your knives now. If the material reacts differently today, adjust the pace rather than the whole plan for your knives.

  16. 16. Mark anything off about a whetstone

    Catching a small problem now is much easier than redoing your knives at the end. Look at the whole thing, not only the part you just touched on your knives.

  17. 17. Write one line about a cutting board in your notes

    Keep one small spare part with the finished your knives to save a future trip. Decide now when you will revisit it; otherwise the habit around your knives quietly slips off the list.

  18. 18. Label a damp cloth with today's date

    Clean the tools before anything dries on them, or the next session with your knives starts badly. Note the date so you can tell how long the result with your knives really lasted.

  19. 19. Tidy the loose ends of a cutting board

    Close the loop with a quick check that nothing has been left out of your knives. Leave everything ready for a second pass, even if your knives turned out well this time.

  20. 20. Clear away the tools used on a damp cloth

    Tidy the surrounding area as well, because a clear finish makes your knives feel complete. Decide now when you will revisit it; otherwise the habit around your knives quietly slips off the list. Keep going: [How to Get Rid of Fruit…

  21. 21. Gather everything beside a cutting board

    Set out only what this stage needs; a crowded table makes the work on your knives harder than it needs to be. Note the starting condition so you can tell whether the change to your knives actually helped.

  22. 22. Open a window near a damp cloth

    Check the condition of your tools now, while fixing a problem with your knives is still easy. Write down one thing that surprised you; it is usually the useful part.

  23. 23. Keep the pace even on a whetstone

    Move slowly through corners and edges, which is where work on your knives usually goes wrong. Pause when the result starts to look right; overshooting is the common error with your knives.

  24. 24. Repeat the same motion across a cutting board

    Check the clock rather than guessing; timing is the usual hidden variable in your knives. Watch what happens for a few seconds before repeating, since the result with your knives changes gradually.

  25. 25. Keep a damp cloth level while you work

    Change one thing at a time, otherwise you will not know what fixed your knives. A light touch first is safer, because extra pressure is easy to add to your knives.

  26. 26. Work on a whetstone in short passes

    Keep your eyes on the part you are working on, not the finished idea of your knives. If resistance suddenly increases, stop and look rather than forcing your knives.

  27. 27. Measure a cutting board a second time

    If two checks disagree, trust the slower one when working on your knives. One honest check now replaces three rushed corrections to your knives later.

  28. 28. Undo one small part of a damp cloth if needed

    A second angle often reveals a gap you cannot see head-on in your knives. Compare against the goal you wrote down rather than against a vague ideal of your knives.

  29. 29. Store a cutting board somewhere dry

    Close the loop with a quick check that nothing has been left out of your knives. Write down the one thing you would do differently with your knives next time. Keep going: [How to Declutter Your Home](/how-to-declutter-your-home) uses the…