How to Update the BIOS on a Windows Computer
A careful twelve-step guide to updating the BIOS on a Windows PC, from checking your current firmware version and matching the exact motherboard model to flashing safely and verifying the result.
-
1. Step 1: Check Your Current BIOS Version
Before downloading anything, find out which firmware version you already have. Press Windows + R, type msinfo32, and press Enter. In the System Information window, look for the BIOS Version/Date line, which usually reads something like…
-
2. Step 2: Identify Your Exact Motherboard or PC Model
BIOS files are model-specific, and the wrong one can brick a board, so identity matters more than anything else here. In the same System Information window, check the System Manufacturer and System Model lines for a prebuilt PC or laptop.…
-
3. Step 3: Download the BIOS File from the Manufacturer
Go directly to the support site of your PC or motherboard maker, such as Dell, HP, Lenovo, ASUS, MSI, Gigabyte, or ASRock, and search for your exact model. Open the Drivers & Downloads or Support section and filter by BIOS or Firmware.…
-
4. Step 4: Read the Release Notes Before You Flash
Every BIOS download comes with a release notes file that most people skip, and it is the most useful document in the whole process. It tells you what the update fixes, whether it requires a previous version to be installed first, whether…
-
5. Step 5: Back Up Your Data and Record Your Settings
A BIOS update normally leaves your files untouched, but it is still a low-level operation, so treat it like any other maintenance task: back up anything irreplaceable to an external drive or the cloud first. Then restart and press the…
-
6. Step 6: Connect to Stable Power
Interrupted flashing is the number one cause of a dead motherboard, so power deserves its own step. On a laptop, plug in the AC adapter and confirm the battery is at least 30 percent charged, because most update utilities refuse to run…
-
7. Step 7: Prepare a FAT32 USB Flash Drive
If your vendor uses a USB-based update method, you need a small flash drive formatted as FAT32, not NTFS or exFAT. Insert the drive, open This PC, right-click it, choose Format, and select FAT32 (a drive of 32 GB or less formats this way…
-
8. Step 8: Run the Manufacturer Windows Flash Utility
Most modern PCs from Dell, HP, Lenovo, and ASUS offer a Windows-based updater, which is the easiest route. Close every other program, save your work, and plug in the power adapter. Run the downloaded executable, accept the license, and…
-
9. Step 9: Or Flash from the Built-In BIOS Utility
Custom-built desktops and many laptops update more reliably from inside the firmware itself. Restart, press the setup key, and look for a tool named EZ Flash, M-Flash, Q-Flash, Instant Flash, or simply BIOS Update. Every vendor names it…
-
10. Step 10: Never Interrupt the Flashing Process
Once the progress bar starts, your only job is to leave the machine alone. Do not press keys, do not close the lid, do not unplug anything, and do not power off even if the screen goes blank for several minutes, because writes to the…
-
11. Step 11: Verify the New Version After Restart
When Windows comes back up, confirm the update actually took. Open msinfo32 again and compare the BIOS Version/Date line with what you wrote down in step one; the version number and date should both be newer. You can also check the vendor…
-
12. Step 12: Restore Settings and Troubleshoot If Needed
Finally, reopen the BIOS setup and reapply the settings you photographed earlier: boot order first, then memory profile, Secure Boot, virtualization, and fan curves. If the machine boots but something feels off, clear the CMOS with the…