Printable checklist

How to Rinse Rice

Rinsing rice washes away loose surface starch so the grains cook up fluffy and separate instead of gummy. This illustrated guide covers 2 methods and 16 steps, with a separate picture for every step.

By Co-authored by 52runoob Editorial Team · 16 steps · Food & Cooking · Updated November 20, 2026

Back to the guide
  1. 1. Measure the rice

    Scoop the amount of rice you need into a clean bowl.

  2. 2. Add cold water

    Pour in enough cold water to cover the rice by about two inches.

  3. 3. Swirl the grains

    Stir the rice with your fingers or a spoon to loosen the surface starch.

  4. 4. Watch the water turn cloudy

    The water will look milky as starch releases from the grains.

  5. 5. Drain carefully

    Tip the bowl to pour off the cloudy water while keeping the rice in.

  6. 6. Repeat the rinse

    Add fresh water and swirl again; repeat several times.

  7. 7. Check the water

    Stop when the runoff looks clear rather than milky.

  8. 8. Drain thoroughly

    Let the rice drain in a strainer before adding it to the pot.

  9. 9. Choose a fine strainer

    Use a fine-mesh sieve so grains cannot slip through.

  10. 10. Add the rice

    Pour the measured rice into the strainer in an even layer.

  11. 11. Rinse under the tap

    Run cold water over the rice while gently stirring.

  12. 12. Stir with your hand

    Move the grains around so water reaches every kernel.

  13. 13. Let the water run clear

    Keep rinsing until the water dripping out is clear.

  14. 14. Shake off excess

    Give the strainer a few shakes to remove extra water.

  15. 15. Tip into the pot

    Transfer the drained rice into your cooking pot.

  16. 16. Add cooking water

    Add fresh water in the ratio your recipe calls for.