Printable checklist

How to Fix SysMain (Superfetch) Using 100% Disk on Windows 11

SysMain, formerly called Superfetch, preloads frequently used apps into memory to speed up startup, but on some SSD-equipped PCs it can drive disk usage very high. Disabling the service through services.msc usually stops the constant disk activity without harming the system. Checking for background updates and free disk space first rules out other causes. This illustrated guide covers 2 methods and 18 steps, with a separate picture for every step.

By Co-authored by 52runoob Editorial Team · 18 steps · Performance & Speed · Updated November 21, 2026

Back to the guide
  1. 1. Open Task Manager

    Press Ctrl+Shift+Esc and open the Processes tab to view running services.

  2. 2. Sort by disk usage

    Click the Disk column header so the highest disk consumer appears first.

  3. 3. Check the SysMain entry

    Look for SysMain near the top and note whether it is reading continuously at high disk.

  4. 4. Rule out Windows Update

    Open Windows Update settings and check that no update is currently installing.

  5. 5. Rule out a security scan

    Open Windows Security and see whether a scan is running in the background.

  6. 6. Decide to disable

    If SysMain is the main disk user on an SSD, proceed to change its service setting.

  7. 7. Check free disk space

    Open Storage settings and confirm the system drive has enough free space.

  8. 8. Remove temporary files

    Run Storage Sense or Disk Cleanup to clear files that add disk load.

  9. 9. Check for pending updates

    In Windows Update, install any pending update that might still be using the disk.

  10. 10. Reboot the PC

    Restart the computer once more after cleanup.

  11. 11. Open the Services console

    Press the Windows key, open the Start menu, and launch the Services app as administrator.

  12. 12. Locate SysMain

    Scroll the list and double-click the SysMain entry to open its properties.

  13. 13. Stop the service

    Click the Stop button so SysMain releases the disk immediately.

  14. 14. Set startup to Disabled

    Change Startup type to Disabled so SysMain does not return after a restart.

  15. 15. Apply the change

    Click OK to save the new service setting.

  16. 16. Restart the computer

    Restart Windows so the change takes full effect.

  17. 17. Monitor disk usage

    Reopen Task Manager and confirm no process is pinned at very high disk.

  18. 18. Re-enable if needed

    If you miss preloading, set SysMain Startup type back to Automatic in Services.