Printable checklist

How to Fix Slow Boot Caused by Fast Startup on Windows 11

Fast startup is a hybrid boot that saves the Windows kernel to a hibernation file so the next start is quicker. When that saved state is stale after a driver or update change, it can cause slow boots, frozen logins, or driver errors. Toggling fast startup off, forcing a full shutdown, and updating storage and chipset drivers usually resolves it. This illustrated guide covers 3 methods and 21 steps, with a separate picture for every step.

By Co-authored by 52runoob Editorial Team · 21 steps · Performance & Speed · Updated November 21, 2026

Back to the guide
  1. 1. Open Control Panel

    Type control panel in the Start menu search and open the classic Control Panel.

  2. 2. Open Power Options

    Select System and Security, then open Power Options.

  3. 3. Choose power button settings

    Click the link for choosing what the power buttons do in the left pane.

  4. 4. Unlock the settings

    Click the link to change settings that are currently unavailable.

  5. 5. Turn fast startup off

    Uncheck the fast startup option under Shutdown settings and save changes.

  6. 6. Restart and compare

    Restart the PC and time how long the desktop takes to appear.

  7. 7. Test a cold boot

    Shut down fully, then power on again to see whether the desktop appears faster with the change.

  8. 8. Verify the setting stuck

    Reopen the power settings and confirm the fast startup switch stayed off after the restart.

  9. 9. Open an administrator terminal

    Right-click Start and open Windows Terminal or Command Prompt as administrator.

  10. 10. Run a full shutdown command

    Type shutdown /s /full and press Enter to bypass the hybrid boot once.

  11. 11. Use Shift plus Shut down

    Hold Shift while choosing Shut down in the Start menu for a one-time full shutdown.

  12. 12. Restart after updates

    Restart normally after any Windows update to rebuild a clean startup image.

  13. 13. Disable quick boot in firmware

    If available, turn off fast boot in the firmware settings for a cleaner hardware start.

  14. 14. Re-enable fast startup if helpful

    Turn fast startup back on only if your measured boot time improves.

  15. 15. Check Windows Update

    Open Windows Update and install any optional driver updates offered for your PC.

  16. 16. Update storage drivers

    Visit your PC or drive maker's site for current chipset and storage controller drivers.

  17. 17. Update graphics drivers

    Install the latest graphics driver, since display drivers often affect fast boot.

  18. 18. Run the power troubleshooter

    In Settings, System, Troubleshoot, run the Power troubleshooter if Windows offers it.

  19. 19. Check disk errors

    Run chkdsk c: /f to rule out disk faults that slow startup.

  20. 20. Confirm a stable boot

    Restart twice and confirm the PC reaches the desktop quickly and reliably.

  21. 21. Review recent system errors

    Check the reliability report for boot failures that may still point to a stale driver.