Printable checklist

How to Fix 'Low Memory' Warnings When You Have RAM Free

Windows can warn about low memory even when Task Manager shows free RAM, because the warning reflects the commit limit rather than physical memory alone. A too-small paging file or a process that leaks memory can exhaust committed virtual memory while RAM still looks available. Check the commit figure, enlarge the paging file, and track down any process whose memory keeps climbing. This illustrated guide covers 3 methods and 18 steps, with a separate picture for every step.

By Co-authored by 52runoob Editorial Team · 18 steps · Performance & Speed · Updated November 21, 2026

Back to the guide
  1. 1. Open Task Manager

    Use the keyboard shortcut for Task Manager and switch to the Performance tab.

  2. 2. Read the commit line

    Note the current commit value and compare it with the commit limit shown in memory performance.

  3. 3. Open advanced system settings

    Search for advanced system settings and open the performance options from System Properties.

  4. 4. Open virtual memory settings

    Go to the Advanced tab and change the virtual memory settings under Performance.

  5. 5. Check automatic management

    See whether automatic paging file management is enabled and which drives have a pagefile.

  6. 6. Apply a larger paging file

    If the limit is too low, select a custom size with a larger maximum and restart.

  7. 7. Open the Processes tab

    Show the Processes tab in Task Manager and sort by the memory column.

  8. 8. Add the commit size column

    Use the select columns dialog to show commit size for deeper memory analysis.

  9. 9. Sort by commit size

    Sort the list so the processes reserving the most virtual memory appear first.

  10. 10. Watch for steady growth

    Observe the top process for a few minutes to see whether its memory keeps climbing.

  11. 11. Close or restart the suspect

    End the leaking task or restart the application to release the memory it holds.

  12. 12. Update or reinstall it

    Install the latest version of the offending program or its driver to fix the leak.

  13. 13. Monitor it over a longer session

    Leave the window open for a while and check whether the same process keeps rising.

  14. 14. Check free disk space

    Make sure the drive holding the paging file has enough free space to grow.

  15. 15. Update system drivers

    Install optional driver updates through Windows Update, especially chipset and graphics drivers.

  16. 16. Open Windows Memory Diagnostic

    Search for the memory diagnostic tool from the Windows start screen and launch it.

  17. 17. Restart and run the test

    Choose to restart and check for problems, then wait while the memory test runs.

  18. 18. Switch to extended testing

    Press the function key for test options and select the extended test mix for a deeper check.