Printable checklist

How to Fix com.android.phone High CPU on Android

com.android.phone is the Android telephony process that registers the SIM, handles calls and manages the mobile network. High CPU usually follows a weak signal, a faulty SIM or a repeated network search. Re-register the network, clean the carrier app and reset network settings if needed. This illustrated guide covers 3 methods and 19 steps, with a separate picture for every step.

By Co-authored by 52runoob Editorial Team · 19 steps · Performance & Speed · Updated November 22, 2026

Back to the guide
  1. 1. Check system battery usage

    Open Settings, Battery, Battery usage and use the menu to show the system view, then look for com.android.phone or Phone services.

  2. 2. Confirm the process is high

    Verify the telephony process is near the top while the phone is idle, which distinguishes it from a regular app using the modem.

  3. 3. Note signal conditions

    Observe whether the problem began in a weak coverage area, while roaming or after adding a second SIM, since all three increase registration work.

  4. 4. Toggle Airplane mode

    Swipe down for Quick settings, tap Airplane mode, wait ten seconds and tap it again so the phone re-registers on the network.

  5. 5. Restart the phone

    Hold the power button and tap Restart to fully reset the modem connection after the network search.

  6. 6. Reseat the SIM card

    Power off, remove the SIM tray, check that the card sits flat and reinsert it, since a loose SIM can cause repeated registration attempts.

  7. 7. Prefer LTE over weak 5G

    Open Settings, Network and internet, SIMs, Preferred network mode and choose LTE if 5G coverage at your location is unreliable.

  8. 8. Test with one SIM at a time

    On a dual-SIM phone, go to Settings, Network and internet, SIMs and temporarily turn off one SIM to see if CPU load falls.

  9. 9. Clear the Carrier Services cache

    Go to Settings, Apps, See all apps, Carrier Services, Storage and cache and tap Clear cache to remove stale network configuration files.

  10. 10. Update Carrier Services

    Open the Play Store, tap the profile icon, Manage apps and device, and update Carrier Services if an update is available.

  11. 11. Install system and carrier updates

    Open Settings, System, System update and install pending updates, which often include refreshed carrier settings.

  12. 12. Clear the Phone Services cache

    Use Show system in the app list, open Phone Services or com.android.phone, then clear its cache only, without touching data.

  13. 13. Reset network settings

    Go to Settings, System, Reset options, Reset Wi-Fi, mobile and Bluetooth and confirm, then reconnect to your networks.

  14. 14. Verify the APN defaults

    Open Settings, Network and internet, SIMs, Access point names and select Reset to default so the phone uses the correct carrier values.

  15. 15. Install the latest Android update

    Check Settings, System, System update once more and install any security patch, since modem bugs are often fixed there.

  16. 16. Update phone-related apps

    Update the Phone, Messages and Carrier Services apps in the Play Store so they match the current system version.

  17. 17. Test the SIM in another device

    Ask a friend or use a spare phone to test the same SIM; if the high load follows the card, request a replacement from your carrier.

  18. 18. Test in Safe mode

    Long-press Power off and choose Safe mode, then check whether CPU stays normal, which rules out a third-party dialer or SMS app.

  19. 19. Factory reset as a last resort

    After backing up contacts and photos, use Settings, System, Reset options, Erase all data and set the phone up fresh.