How to Fix a Blue Screen on Windows 11
A Windows 11 blue screen (BSOD) is a safety stop that protects your data when Windows hits a serious problem; most are fixed by removing new hardware, booting into Safe Mode, updating drivers, or running built-in system repair tools. This illustrated guide covers 3 methods and 18 steps, with a separate picture for every step.
-
1. Write down the stop code
When the blue screen appears, read the stop code at the bottom (for example MEMORY_MANAGEMENT) and write it down or take a photo before the PC restarts.
-
2. Remove newly added hardware
If you added hardware or a USB device before the crashes began, shut down the PC, unplug the new device, and try restarting.
-
3. Restart the computer
Restart Windows normally. A one-time blue screen is often resolved by a simple reboot with no further action needed.
-
4. Enter the Windows Recovery Environment
If Windows will not start, hold the power button to force a shutdown, then power on and interrupt boot three times to reach Automatic Repair, then choose Advanced options.
-
5. Start in Safe Mode
In Advanced options choose Startup Settings, restart, then press 4 or 5 to boot into Safe Mode, where only essential drivers load.
-
6. Run the Blue Screen troubleshooter
In Safe Mode open Settings, System, Troubleshoot, Other troubleshooters, and run the Blue Screen troubleshooter to detect obvious faults.
-
7. Open Device Manager
Right-click the Start button and choose Device Manager to see all installed hardware and any devices flagged with a yellow warning icon.
-
8. Find devices with warning icons
Look for any device marked with a yellow exclamation mark, which indicates a driver problem that can cause blue screens.
-
9. Update a suspect driver
Right-click the flagged device, choose Update driver, and let Windows search automatically for the latest compatible driver.
-
10. Roll back a recent driver
If the crashes began after a driver update, open the device Properties, Driver tab, and choose Roll Back Driver to restore the previous version.
-
11. Check Windows Update
Open Settings, Windows Update, and select Check for updates, then install all available patches and optional driver updates.
-
12. Restart and test stability
Restart the PC and use it normally for a while to confirm the blue screen no longer appears after the driver changes.
-
13. Open Command Prompt as administrator
From the Recovery Environment or an admin Start menu, open Command Prompt with administrator rights so you can run repair commands.
-
14. Run the System File Checker
Type sfc /scannow and press Enter to scan and repair corrupted Windows system files, then wait for it to finish.
-
15. Run DISM repair
Type DISM /Online /Cleanup-Image /RestoreHealth and press Enter to repair the Windows component store if SFC found problems.
-
16. Check the disk for errors
Run chkdsk c: /f to find and fix file system errors on the drive that could trigger stop codes.
-
17. Run Windows Memory Diagnostic
Open Windows Memory Diagnostic from the Start menu and restart to test the RAM for faults that cause memory-related blue screens.
-
18. Use System Restore or Reset this PC
If all else fails, choose a restore point from Recovery options, or use Reset this PC while keeping your personal files.