Printable checklist

How to Fix 100% Disk Usage While Windows Update Is Downloading

When Windows Update downloads in the background, BITS and Delivery Optimization continuously write large update files, which can hold disk usage near 100% and make the PC feel sluggish. The fix is to schedule updates around active hours or pause them, cap Delivery Optimization bandwidth, and let a stuck update finish by resetting update components if needed. Performance recovers once the download and install complete. This illustrated guide covers 3 methods and 21 steps, with a separate picture for every step.

By Co-authored by 52runoob Editorial Team · 21 steps · Performance & Speed · Updated November 21, 2026

Back to the guide
  1. 1. Open Windows Update settings

    Open Settings, then Windows Update, to see the current download and install status.

  2. 2. Confirm an update is downloading

    Check whether a percentage or a downloading status is shown on the page.

  3. 3. Open Active hours settings

    Click Active hours and choose the range when you normally use the PC so updates avoid that window.

  4. 4. Set active hours manually

    Choose manual active hours that cover your workday to prevent unexpected restarts during use.

  5. 5. Pause updates briefly if needed

    Use the Pause updates control to hold the download for a short period when you need disk performance.

  6. 6. Choose a convenient resume date

    Select the earliest available resume date so updates are not delayed indefinitely.

  7. 7. Plug in power and stay connected

    Keep the PC on AC power and online so a paused or rescheduled update can proceed smoothly.

  8. 8. Resume updates when convenient

    Return to Windows Update and resume so the download and installation complete.

  9. 9. Open Delivery Optimization settings

    In Settings, go to Windows Update, Advanced options, then Delivery Optimization.

  10. 10. Review the download source option

    Check whether the PC is set to download updates from other PCs as well as Microsoft.

  11. 11. Change the download source

    Select the option to use Microsoft sources only and reduce peer activity that adds load.

  12. 12. Open advanced bandwidth settings

    Click Advanced settings to find the bandwidth limits for downloads and uploads.

  13. 13. Cap download bandwidth

    Enable and lower the download bandwidth percentage so updates use fewer system resources.

  14. 14. Cap upload bandwidth

    Limit how much upload bandwidth the PC shares with other devices to reduce background work.

  15. 15. Save and monitor disk usage

    Apply the settings and check Task Manager to confirm disk activity has eased.

  16. 16. Confirm the update is genuinely stuck

    Check that the download percentage has not moved for a long time before resetting anything.

  17. 17. Run the Windows Update troubleshooter

    Open Settings, System, Troubleshoot, and run the Windows Update troubleshooter.

  18. 18. Open an elevated Command Prompt

    Search for Command Prompt and choose Run as administrator to prepare to reset services.

  19. 19. Stop the update services

    Use net stop commands to halt the Windows Update, BITS, and Cryptographic services.

  20. 20. Clear the update cache

    Rename the SoftwareDistribution and catroot2 folders so Windows rebuilds a fresh cache.

  21. 21. Restart services and the PC

    Restart the stopped services, then reboot and check for updates again.