How to Fix 100% Disk Usage While BitLocker Is Encrypting the Drive
BitLocker encrypts a drive in the background by reading and writing every sector, which can push disk usage to 100% for hours on a large or slow drive. The fix is to confirm encryption is actually running, keep the PC on power, and let the pass finish without interruption. Performance returns to normal on its own once encryption completes. This illustrated guide covers 3 methods and 21 steps, with a separate picture for every step.
-
1. Open Control Panel BitLocker settings
Search for 'BitLocker Drive Encryption' in the Start menu and open it to see the encryption status of each drive.
-
2. Check the encryption progress status
Look for a status such as 'Encrypting' or a percentage indicator next to the drive letter.
-
3. Open Task Manager to confirm disk load
Press Ctrl+Shift+Esc, go to the Processes tab, and note that Disk is near 100% while encryption runs.
-
4. Plug in the power adapter
Connect the AC charger because Windows throttles background encryption on battery to save power.
-
5. Allow the encryption pass to complete
Leave the PC running and avoid heavy file operations until the status changes to fully encrypted.
-
6. Recheck disk usage after completion
Reopen Task Manager and confirm disk activity has dropped back to normal once encryption is finished.
-
7. Save your work before pausing
Finish and save any open documents so a temporary slowdown does not risk losing changes.
-
8. Open the BitLocker control panel
Search for BitLocker Drive Encryption and open the classic Control Panel page listing your drives.
-
9. Pause encryption if available
Choose the option to pause encryption when you need a responsive disk for a short critical task.
-
10. Close unnecessary disk-heavy apps
Exit programs that are copying, downloading, or indexing large files while encryption is active.
-
11. Pause large cloud syncs
Temporarily pause OneDrive or other sync clients that compete with encryption for disk I/O.
-
12. Delay scheduled scans and backups
Reschedule antivirus scans and backups to run after encryption finishes rather than during it.
-
13. Keep the PC cool and powered
Ensure good ventilation and continuous power so encryption is not slowed by thermal or battery throttling.
-
14. Resume encryption when done
Return to the BitLocker control panel and resume encryption so the drive finishes protecting all data.
-
15. Check free space on the drive
Open File Explorer and confirm the encrypted drive has enough free space for metadata and normal use.
-
16. Open an elevated Command Prompt
Search for Command Prompt, right-click it, and choose Run as administrator.
-
17. Run chkdsk to check disk errors
Type chkdsk and press Enter to scan the drive for file system errors that can slow encryption.
-
18. Review SMART drive health
Use a drive health utility to check the disk's SMART attributes for signs of impending failure.
-
19. Update storage and chipset drivers
Install current storage controller and chipset drivers from the maker to avoid slow input and output.
-
20. Avoid defragmenting an SSD
Do not run defragmentation on a solid-state drive; it adds needless writes while encryption is active.
-
21. Monitor disk usage again
After the pass and checks, watch Task Manager to confirm the 100% disk condition has cleared.