How to Add Color to Beeswax
Colouring beeswax lets you make custom candles, wraps, and balms in any shade. This illustrated guide covers 3 methods and 17 steps, with a separate picture for every step.
-
1. Set up a double boiler
Place a heat-safe bowl over a pot of simmering water so the wax melts evenly.
-
2. Add the beeswax
Put pellets or chopped blocks into the bowl and let them melt slowly.
-
3. Keep the heat low
Use gentle heat and never leave melting wax unattended.
-
4. Stir until fully liquid
Mix the wax until there are no solid lumps left.
-
5. Protect your workspace
Lay down newspaper so any drips are easy to clean.
-
6. Choose your colourant
Pick candle dye flakes, dye oil, or a natural pigment suited to wax.
-
7. Add a small amount
Sprinkle in a little dye so you can control the depth of colour.
-
8. Stir thoroughly
Mix continuously until the colour is uniform with no streaks.
-
9. Make a test sample
Spoon a little wax onto a cold plate and check the cooled colour.
-
10. Adjust the shade
Add more dye and stir again if the cooled sample is too pale.
-
11. Try a natural tint
For a soft look, mix in a pinch of turmeric or cocoa powder.
-
12. Prepare your mould
Set out candle moulds or a lined tray before the wax cools.
-
13. Pour at the right temperature
Let the wax cool slightly so it pours smoothly without overheating the mould.
-
14. Tap to release bubbles
Gently tap the mould so trapped air rises to the surface.
-
15. Let it set completely
Allow the wax to cool and harden before unmoulding.
-
16. Label and store scraps
Wrap leftover coloured wax and label the shade for later projects.