How to Tie a Tie
A twelve-step guide to tying a necktie: choosing the right tie, preparing the shirt and collar, draping the tie, crossing and wrapping, passing through the loop, tightening and shaping the knot, and checking the finished length.
-
1. Step 1: Choose the Right Tie
Start with the tie itself. Pick a tie that matches your shirt and suits the occasion, with a solid or subtle pattern being the safest choice for formal moments. The tie should be roughly the same width as your lapels and feel comfortable…
-
2. Step 2: Prepare Your Shirt and Collar
Before the tie goes on, make sure the shirt is right. Fasten the top button of your shirt, then flip the collar up and out so it stands cleanly against your neck. The collar should be flat and even on both sides, with no overlap or twist,…
-
3. Step 3: Put the Tie on and Hang It Flat
Drape the tie around your neck with the wide end on your right and the narrow end on your left. The wide end should hang down roughly to your waist on the front side, while the narrow end hangs a little shorter behind it. Adjust the tie…
-
4. Step 4: Position Your Hands for the Knot
Bring the narrow end across the front of the wide end, crossing over it at the point where you want the knot to form, right at the collar. Hold the narrow end with your left hand and the wide end with your right, keeping the crossing firm…
-
5. Step 5: Wrap the Wide End Around the Narrow End
Take the wide end in your right hand and wrap it across the front of the narrow end, moving from right to left across the front of the knot. The wide end should cross over the narrow end once, cleanly and neatly. This wrap is the heart of…
-
6. Step 6: Bring the Wide End Up Through the Loop
Now bring the wide end up and pass it through the loop you have just created, the opening between the collar and the crossing of the tie. Pass the tip of the wide end up through the center, pulling it through so the end is now hanging on…
-
7. Step 7: Tighten the Knot Gently
With both ends in your hands, pull the knot tight in a smooth, even motion. Do not jerk or yank, because a gentle, firm pull seats the knot snugly against the collar without wrinkling the fabric. The knot should feel tight enough to hold,…
-
8. Step 8: Adjust the Knot Shape
Before letting go, shape the knot. Use your fingers to adjust the knot into a neat, symmetrical wedge shape, with the seam of the tie facing inward and hidden. The knot should sit flat against the collar, with both front and back looking…
-
9. Step 9: Check the Length Against Your Belt
Look down at the tie and check where the tip ends. The tip of the tie should land at the top of your belt buckle, covering the buckle slightly, but not hanging below it. If the tie is too long, tighten the knot slightly to raise the tip;…
-
10. Step 10: Tuck the Knot Smoothly Under the Collar
Once the knot is set, use your fingers to slide the knot up gently so that it sits snugly under the collar, tucked out of sight beneath the collar points. The knot should be hidden by the collar from the front, giving the tie a clean,…
-
11. Step 11: Flatten and Align the Tie
With the knot in place, run your fingers down the length of the tie to flatten any twists or folds in the fabric. The tie should hang straight down the center of your chest, with no twisting or waving from side to side. A smooth, aligned…
-
12. Step 12: Practice Until It Becomes Routine
Like any physical skill, tying a tie improves with repetition. Practice the sequence a few times at home, with no pressure and no occasion waiting, until the hand motions feel automatic. Once the knot is tied a handful of times, you will…