Printable checklist

How to Fix System Interrupts High CPU on Windows 11

System Interrupts is not a real process but a Windows counter for hardware interrupt activity, so high CPU means a device or driver is signalling the processor far too often. Update or roll back suspect drivers, disconnect peripherals and disable devices one at a time to find the culprit, then run hardware diagnostics. This illustrated guide covers 3 methods and 23 steps, with a separate picture for every step.

By Co-authored by 52runoob Editorial Team · 23 steps · Performance & Speed · Updated November 21, 2026

Back to the guide
  1. 1. Confirm System Interrupts in Task Manager

    Press Ctrl+Shift+Esc, open Processes, and confirm System Interrupts is the top CPU consumer.

  2. 2. Open Resource Monitor

    Click Open Resource Monitor at the bottom of Task Manager to look closer at hardware activity.

  3. 3. Open Device Manager

    Right-click the Start button and choose Device Manager to list all installed hardware.

  4. 4. Look for warning icons

    Scan the device tree for yellow warning marks that show a driver problem.

  5. 5. Check network adapters

    Expand Network adapters and note any device showing errors or an unusual warning icon.

  6. 6. Check storage and USB controllers

    Expand Disk drives and USB controllers to spot devices that may be failing.

  7. 7. Update a suspect driver

    Right-click the suspect device, choose Update driver, and let Windows search for a newer version.

  8. 8. Observe CPU after the change

    Return to Task Manager and check whether System Interrupts CPU has dropped after the update.

  9. 9. Create a restore point

    Search for Create a restore point and save one so you can undo hardware changes safely.

  10. 10. Open Device Manager

    Open Device Manager again and keep Task Manager visible to compare CPU usage.

  11. 11. Disable the network adapter

    Right-click the network adapter and choose Disable device, then watch the CPU reading.

  12. 12. Check CPU usage

    See whether System Interrupts CPU falls while the adapter is disabled.

  13. 13. Test USB controllers

    Re-enable the adapter, then disable a USB controller and check the CPU again.

  14. 14. Test the graphics adapter

    If you use a dedicated graphics card, disable it temporarily and watch the CPU level.

  15. 15. Disconnect external peripherals

    Unplug external USB devices such as hubs, cameras and drives one at a time.

  16. 16. Test with built-in devices only

    Run the PC with only essential internal hardware connected and note whether CPU is normal.

  17. 17. Re-enable and name the culprit

    Re-enable each device in turn until CPU spikes again, identifying the problematic hardware.

  18. 18. Run Windows Memory Diagnostic

    Search for Windows Memory Diagnostic and let it check the RAM for hardware faults.

  19. 19. Check the disk for errors

    Run a disk check on the system drive to rule out a failing disk generating interrupts.

  20. 20. Run System File Checker

    Open an administrator terminal and run the SFC scan to repair corrupted system files.

  21. 21. Run DISM restore health

    Enter the DISM restore health command to fix the underlying Windows component store.

  22. 22. Use maker diagnostics

    Run the hardware diagnostic tool from your PC manufacturer's support software.

  23. 23. Update BIOS and chipset

    Install the latest BIOS and chipset drivers from the manufacturer and reboot to verify.