Printable checklist

How to Fix a Leaky Faucet

A good result with ix a Leaky Faucet mostly comes from doing the same small things in the same order. This illustrated guide covers 2 methods and 20 steps, with a separate picture for every single step.

By Co-authored by HowCompass Editorial Team · 20 steps · Home & Garden · Updated November 16, 2026

Back to the guide
  1. 1. Check an adjustable wrench before you begin

    Begin with less than you think you need; you can always add more to the faucet. Set out only what this stage needs; a crowded table makes the work on the faucet harder than it needs to be.

  2. 2. Lay a towel under a replacement washer

    Give yourself a defined stopping point before you begin on the faucet. Begin with less than you think you need; you can always add more to the faucet.

  3. 3. Follow the same order around a cloth

    Keep the same hand position from one pass to the next so the result with the faucet stays consistent. Work in daylight when you can, since small differences are easier to see.

  4. 4. Add a small amount to a replacement washer

    Keep the working area tidy between passes so nothing gets knocked into the faucet. Watch what happens for a few seconds before repeating, since the result with the faucet changes gradually.

  5. 5. Cover a step stool loosely while you wait

    Keep your eyes on the part you are working on, not the finished idea of the faucet. Take a breath between passes so your hands stay steady on the faucet.

  6. 6. Let someone else glance at a cloth

    A second angle often reveals a gap you cannot see head-on in the faucet. Make a note of what you would change next time before you forget the details of the faucet.

  7. 7. Label an adjustable wrench with today's date

    Keep one small spare part with the finished the faucet to save a future trip. Write down the one thing you would do differently with the faucet next time.

  8. 8. Set a reminder about a label maker for later

    Store it somewhere you will actually find it, not somewhere merely tidy for the faucet. Leave everything ready for a second pass, even if the faucet turned out well this time. Keep going: [How to Clean a…

  9. 9. Pick the calmest hour for a replacement washer

    Note the starting condition so you can tell whether the change to the faucet actually helped. A clear starting surface is the cheapest way to avoid a mistake later with the faucet.

  10. 10. Write down your goal for a cloth

    Two minutes of sorting here usually saves ten minutes of searching once you start on the faucet. Give yourself a defined stopping point before you begin on the faucet.

  11. 11. Decide what finished looks like for a replacement washer

    A quick dry run with no material shows you where your hands will need to go for the faucet. Put anything fragile to one side before the main work on the faucet begins.

  12. 12. Fold the edge of a cloth inward

    Change one thing at a time, otherwise you will not know what fixed the faucet. Work at the pace you can repeat, not the pace you can manage once with the faucet.

  13. 13. Work on an adjustable wrench in short passes

    Leave a little margin for a correction at the end instead of using everything on the faucet now. Pause when the result starts to look right; overshooting is the common error with the faucet.

  14. 14. Keep the pace even on a replacement washer

    Keep the working area tidy between passes so nothing gets knocked into the faucet. Take a breath between passes so your hands stay steady on the faucet.

  15. 15. Let a label maker rest for a minute

    Watch what happens for a few seconds before repeating, since the result with the faucet changes gradually. Keep the same hand position from one pass to the next so the result with the faucet stays consistent.

  16. 16. Lift a soft brush instead of dragging it

    Change one thing at a time, otherwise you will not know what fixed the faucet. Work at the pace you can repeat, not the pace you can manage once with the faucet.

  17. 17. Compare an adjustable wrench with your reference

    Make a note of what you would change next time before you forget the details of the faucet. A quick comparison with the picture above keeps the faucet on track.

  18. 18. Wipe the area around a replacement washer

    Leave everything ready for a second pass, even if the faucet turned out well this time. Write down the one thing you would do differently with the faucet next time.

  19. 19. Let an adjustable wrench settle overnight

    Write down the one thing you would do differently with the faucet next time. A single photo gives you a reference you will reuse for the faucet.

  20. 20. Plan the next attempt with a cloth

    Putting things away properly is what makes the next attempt at the faucet quick. Note the date so you can tell how long the result with the faucet really lasted. Keep going: [How to Grow Herbs Indoors](/how-to-grow-herbs-indoors) uses the…