Printable checklist

How to Fix 100% Disk Usage When No Process Shows High Disk in Task Manager

When Task Manager shows disks at 100% but no single process is responsible, the activity usually comes from hidden input and output by system services such as SysMain, an antivirus scan, a disk error check, the paging file, or a failing drive. Use Resource Monitor to expose the real culprit, then address it directly. Checking drive health and storage drivers rules out hardware causes. This illustrated guide covers 2 methods and 19 steps, with a separate picture for every step.

By Co-authored by 52runoob Editorial Team · 19 steps · Performance & Speed · Updated November 21, 2026

Back to the guide
  1. 1. Open Task Manager

    Press Ctrl+Shift+Esc and view the Processes tab to confirm the Disk column reads near 100%.

  2. 2. Sort processes by disk usage

    Click the Disk column header to sort processes and see whether any single item stands out.

  3. 3. Open Resource Monitor

    In Task Manager, go to the Performance tab and click the link to open Resource Monitor.

  4. 4. Select the Disk tab

    Switch to the Disk tab to see detailed read and write activity for the whole system.

  5. 5. Sort by read and write bytes

    Click the Read and Write columns to reveal which process is generating the most disk traffic.

  6. 6. Identify System and service activity

    Look for SysMain, MsMpEng, or the System process that Task Manager did not show clearly.

  7. 7. Check the disk queue length

    Note a consistently high queue length, which indicates the disk cannot keep up with requests.

  8. 8. Watch for intermittent spikes

    Observe whether usage spikes in patterns that suggest scans, indexing, or paging rather than one app.

  9. 9. Note the offending process name

    Write down the exact process or service name so you can target it in the next steps.

  10. 10. Close Resource Monitor

    Exit Resource Monitor once you know the source and move on to addressing that specific cause.

  11. 11. Open the Services console

    Press Windows+R, type services.msc, and press Enter to open the Services console.

  12. 12. Locate SysMain

    Scroll to SysMain, formerly called Superfetch, and double-click it to open its properties.

  13. 13. Stop and disable SysMain

    Click Stop and set Startup type to Disabled, then click OK to apply the change.

  14. 14. Run an elevated Command Prompt

    Search for Command Prompt and choose Run as administrator to prepare for disk checks.

  15. 15. Run chkdsk on the drive

    Type chkdsk C: /f and press Enter, scheduling a restart if the volume is locked.

  16. 16. Run a full Windows Security scan

    Open Windows Security and run a full scan to rule out malware driving disk activity.

  17. 17. Check the drive's SMART health

    Open a drive health utility and review SMART attributes for warnings or reallocated sectors.

  18. 18. Update the storage driver

    Open Device Manager and update the disk and storage controller drivers to rule out driver bugs.

  19. 19. Reboot and recheck disk usage

    Restart the PC and verify in Task Manager that disk usage has returned to normal.